MISSING SPARGE ARM, hence price
The NEW MiniMash Lauter Tun is designed from the ground up for brewers. It is not a converted water jug or picnic cooler. It will last longer than GOTT or any converted cooler on the market.
The MiniMash Lauter Tun is a round, 15us gallon (12.49 uk gallons) tank will hold up to 35 lbs of grain. Tank is 21 3/4" tall by 15" in diameter. 3/32" screen holes are ideal for a good filter bed. 5/16" thick walls provide mass for strength and good insulation. Transfers BTUs 100,000 times slower than stainless steel based on BTU transfer rate high-density polyethylene (HDPE). Sometimes a blanket or neoprene for insulation is needed.
False Bottom. The true bottom is 12 1/4" diameter and 1 3/4" deep. The size difference from the tank above forms a ledge inside. A stainless steel bolt is threaded through a center leg with a wing nut and washer to seal the screen in place tight against this ledge and the leg. The flat screen is great for lautering. It will not sag or allow grain to pass into the true bottom. The top of the bolt is an ideal depth measurement for stirring. Now it is easy to stir the grain without disturbing the filter bed.
Sparge Head. The brass sparge head has no moving parts. The design spreads the hot liquor evenly. However, it does require some water drop or pressure to reach the sides of the tank. We recommend leaving about 1/2" of water on top of the grain bed and stirring regularly. The hot liquor will sprinkle gently onto the grain. The sparge head screws into the 1/2" threads in the lid and will not clog.
Accurate Temperature Monitoring. Thermometer threads are strategically located for easy and accurate monitoring just above the screen and below the level of the center screen hold down bolt.
Sight Glass. This design perfection is to assist in balancing the vacuum created when hot liquor flows out. The sight glass will also prevent channeling. When you know the liquid level you will know how recirculating (RIMs) is progressing or when to add hot liquor. With the MiniMash, the variables of mashing are under your control.
Extra Threads. Two extra 1/2" threads have been added to the back of the MiniMash. One at the top and one at the bottom below the screen for RIMs or any other creative ideas you may have. The top thread allows you to bypass the sparge head directly into the top of the grain bed. The extra lower thread can be used for specific gravity and pH testing.
Partial Grain Brewers. Extract brewers can add a little specialty grain and flavor with the MiniMash Lauter Tun.
Recipe Size. Designed for both 5 and 10 gallon recipe size brewers.
Making Extract. Take the big step and make your own extract. The choice represents more opportunities for great tastes and fun. The MiniMash Lauter Tun was designed and developed by brewers concerned about efficiency, taste and repeatability.
Ships Ready to Mash. Just clean, warm, start your mash - sparge when ready - enjoy the new flavors and challenge.
Sparge Arm and Thermometer is includedFor instructions and care look here
PLEASE NOTE SIZES QUOTED ARE USA SIZES AND MEASUREMENTS