1056 Wyeast American Ale Liquid Beer Yeast - Use By 23/04/2025

Wyeast 1056 American Ale Yeast

1056 Wyeast yeast

Very clean, crisp flavor characteristics with low fruitiness and mild ester production. A very versatile yeast for styles that desire dominant malt and hop character.

This strain makes a wonderful “House” strain. Mild citrus notes develop with cooler 60-66°F (15-19؛C) fermentations. Normally requires filtration for bright beers.

Flocculation: Medium-Low
Attenuation: 73-77%
Temperature Range: 60-72F, 15-22C
Alcohol Tolerance: 11% ABV
Ideal for:-
American Amber Ale
American Barleywine
American Brown Ale
American IPA
American Pale Ale
American Stout
Braggot
Brown Porter
Christmas/Winter Specialty Spiced Beer
Cream Ale
Dry Stout
Fruit Beer
Imperial IPA
Irish Red Ale
Other Smoked Beer
Russian Imperial Stout
Spice, Herb, or Vegetable Beer
Strong Scotch Ale
Wood-Aged Beer
Instructions How to use the Activator wyeast
1. To activate, locate and move inner packet to a corner. Place this area in palm of one hand and firmly smack package with the other hand to break inner nutrient packet. Confirm inner packet is broken.
2. Shake the package well to release the nutrients.
3. Allow package to incubate and swell for three hours or more at 70-75°F (21-24°C) or immediately direct pitch into wort.
4. Use sanitizing solution to sanitize the package before opening.
5. Shake well, open and pour Activator™ into five gallons of well-aerated or oxygenated wort at 70-75°F (21-24°C). Maintain temperature until fermentation is evident: by CO2 bubble formation, bubbling airlock or foaming on top of wort.
6. Adjust to desired fermentation temperature.
Full swelling of Activator™ packages is not required for their use. The contents of Activator™ packages may be direct-pitched without prior activation. Our smack pack technology is intended to be a tool for your use in determining viability, and in initiating metabolism for faster starts to fermentation
Swelling of the packs before they are smacked .If the packs warm up, dissolved CO2 in the yeast slurry will come out of solution and cause the pack to swell. It is not going from liquid to a gas state.. the liquid form of CO2 only exists at extremely high pressure or extremely low temperatures.
The swelling DOES NOT indicate that there is an infection or cross contamination.
Please note the wyeast yeasts are sent out without any cooling products, we been selling liquid yeasts for years and have very little trouble Just try to avoid ordering on a Friday as they could be sat in the Parcel Force depot over the weekend.
When using any liquid yeasts good idea to have a dried yeast as a backup